RTS Cstrunk Especificaciones descargar pdf (Pagina 65)

KP9x Phone Operation

KP9X Hang-up Sequence

1. Turn OFF the TIF talk key.

2. On the keypad, tap PHONE-CLR.

3. Turn the TIF talk key ON, then OFF.

The TIF key talk and listen indicators will turn off and the TIF OFF LED activates.

KP9X Dial Sequence

1. Activate the TIF listen key (listen LED green).

2. Make sure the TIF talk key is OFF (Talk LED off).

3. On the keypad, tap CLR-PHONE-PGM.

4. Activate the TIF talk key (talk LED turns green).

The ON LED at the TIF activates, and a dial tone is heard at the KP-632.

5. Using the keypanel keypad, dial the telephone number.

Digits scroll in the display above the TIF talk key.

6. When the far end answers, dial additional digits to access a mail system or automated response system, etc.

7. When finished dialing, momentarily turn OFF the TIF talk key to end dialing mode (talk LED turns red).

8. Turn the TIF talk key back ON for conversation.

KP9X Redial Sequence

1. Tap the PHONE key to activate dialing mode.

2. Tap UP on the TIF key to activate listen.

3. Tap CLR 0 0.

The last phone number will redial.

4. After the number has dialed, click the PHONE key to end dialing mode.

5. If the far end answers, tap down on the TIF key to activate talk.

6. Use the KP9X hang-up sequence to hang up.

KP9X Autodial Sequences

Storing an Autodial Number in the TIF

1. Tap the PHONE key.

2. Tap the TIF talk key to latch it ON.

3. Using the number keys on the keypad, dial the phone number you want to store.

The entire phone number sequence can have up to 30 digits.

NOTE: To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9 9 for each

pause.

4. After dialing the telephone number, click CLR PGM, then enter a two-digit number autodial number (01, 02, etc. up

to 32).

5. After storing the autodial number, hang up using the KP9X hang-up sequence.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 103 104

Sin comentarios

RTS Cstrunk Especificaciones Pagina 65