RTS Cstrunk Especificaciones descargar pdf (Pagina 23)

Talk + DIM

If a point-to-point key has the DIM function as a level 2 talk assignment, activating the key will cause the crosspoint levels to

diminish for any other intercom ports that are currently listening to the same destination and that are in the same DIM table.

NOTE: A full explanation of DIM tables is beyond the scope of this manual. For more information, see the AZedit User

Manual, which can be found at www.rtsintercoms.com.

Operation of Intercom Keys with Options

Group Option Keys

Activating the master key in a key group will activate all keys in that group according to each key's individual key assignment.

Activating a slave key will not affect any other keys in the group.

Solo Key

Activating a key that has the solo option will cause all other keys to turn off until the solo key is again turned off.

Operation of Intercom Talk Keys with the Speaker DIM Setting

Activating any talk key will cause the speaker or headphone volume at this keypanel to diminish by the amount specified in the

Dim menu item on the Service menu.

NOTE: Do not confuse this with the Talk+DIM auto function previously described. Talk+DIM affects the speaker or

headphones on other keypanels when a particular talk key is activated on this keypanel. Speaker DIM affects the

speaker or headphone level on this keypanel when any talk key on this keypanel is activated.

Operation of Intercom Keys assigned to TIF Ports

If an intercom key is assigned to talk to an intercom port that is designated as a TIF port in AZedit, placing the key in the talk

position will activate the KP-632 dialing menu. See “Telephone Operation” on page 19 for further information.

NOTE: You designate an intercom port as a TIF port by checking the Port is TIF check box in AZedit. (In AZedit, click

the KP button on the toolbar to access Keypanels / Ports setup, then select the intercom port where the TIF is

connected, then click the Edit button, then click the Advanced tab. Place a check next to Port is TIF. Remember

to send the change to the intercom system.)

Muting the Microphone

> Tap the MUTE key upward to turn microphone muting on or off.

The Vol. Sel. display alternates between

Hdst

and

Mute

(or between

Spkr

and

Mute

) while the microphone is

muted.

NOTE: While muting is on, you cannot be heard on the intercom, or by anyone on the telephone, or by any device

connected to the mic preamp output of the optional connector module.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

Sin comentarios

RTS Cstrunk Especificaciones Pagina 23