RTS Cstrunk Especificaciones descargar pdf (Pagina 43)

Clear Page Clear a page assignment from the KP-632 or EKP-632.

3. Tap PGM.

Tap Key displays.

4. Tap any key in the row where you want to assign the setup page.

The key assignments for that page should appear in the displays.

6 You can press ↓↓ or ↑↑ to select and assign another setup page. Or, tap CLR to exit.

NOTE: You do not need to run Save Cfg to store changes to setup pages. These are stored in the intercom

system.

Key Option Menu

Key Option Menu, Auto Dial

Use this menu item to store auto dial numbers.

1. Select Auto Dial.

2. Tap PGM.

Phone#? displays.

3. Begin tapping number keys.

The numbers will scroll in the call waiting window.

NOTE: To insert a pause at any time, tap CLR 9 9. For example, you may have to insert a pause after

dialing 9 to get an outside line.

4. Tap FWD. (Do not tap PGM!)

A-Dial #1 displays (store autodial number 1). To store a different autodial number, press

↓↓

↑↑

to select the

desired autodial number.

5. Tap PGM.

#XX displays (where XX = the auto dial number you selected).

6. Run Service Menu, Save Cfg, to store auto dial numbers.

Key Option Menu, Chime

You can add a chime tone to any key for incoming call announcement. The chime tone will activate for about 5 seconds after a

call is received.

1. Select Chime, and then tap PGM.

2. Tap any keys where you want to add a chime tone. Both LEDs will light red for the selected keys.

3. Tap CLR to exit.

4. Run Service Menu, Save Cfg, to store Chime settings.

NOTE: The chime option will continue on a key even if you change the key assignment.

Removing the chime option from a key

Repeat the procedure to add chime, but tap any keys where the LEDs are lit red to turn them off. Run Save Cfg to store the

changes.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 103 104

Sin comentarios

RTS Cstrunk Especificaciones Pagina 43