RTS Cstrunk Especificaciones Pagina 47

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 104
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 46
41
Filtering
Filtering lets you add a 9.6 kHz notch filter to one or more audio sources. This can be useful in a few cases when the keypanel
data port signal is being heard in the audio line due to cable routing problems.
1. Select Filtering, and then tap PGM.
Microphone displays. Press
↓↓
or
↑↑
to display any of the following items:
Microphone
Matrix
Aux 1
Aux 2
2. Tap PGM.
None displays to indicates no filtering is selected.
3. Press ↓↓.
Notch displays.
4. Press PGM.
Notch displays. The arrow indicates that the notch filter is now selected.
5. Tap CLR to exit.
6. Run Service Menu, Save Cfg, to save the change.
Gating
Gating minimizes or eliminates background noise problems by shutting off an audio source when the sound level drops below
a certain threshold.
1. Select Gating, and then tap PGM.
Microphone displays. Press
↓↓
or
↑↑
to display any of the following items
Microphone
Matrix
Aux 1
Aux 2
2. Tap PGM.
Gating displays.
3. Tap PGM.
Gating displays. The arrows indicates gating is now selected.
4. Tap CLR to exit.
5. Run Service Menu, Save Cfg, to save the change.
Metering
Metering lets you use the Vol. display as an LED bar graph meter to monitor an audio signal for about 1 minute.
1. Select Metering, and then tap PGM
Microphone displays. Press
↓↓
or
↑↑
to display any of the following items
Microphone
Matrix
Aux 1
Aux 2
2. Tap PGM.
Meter: Mic displays. Press Microphone displays. Press
↓↓
or
↑↑
to display any of the following items
Meter: Mic
Meter: Matrix
Meter: Aux 1
Meter: Aux 2
Vista de pagina 46
1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 103 104

Comentarios a estos manuales

Sin comentarios