RTS Cstrunk Especificaciones descargar pdf (Pagina 32)

Keypad Programming, Assigning Setup Pages

1. Tap the E-PNL key.

2. Select one of the four setup pages: tap 1, or 2, etc.

3. Tap the PGM key.

4. Tap any key in the row of keys where you want to assign the setup page.

NOTE:

• The same setup page cannot be assigned in more than one place. If a setup page is already assigned

somewhere else, you must clear or change that assignment first. With the exception of the main row

assignment, you can clear any page assignment from a row of keys by entering E-PNL 0 PGM,

then pressing any key in the row.

• If you cannot change the setup page assignments for a particular keypanel, this feature may be

restricted in AZedit (Keypanels/Ports screen|Edit button|Setup tab|Setup Page Options).

• To display setup page assignments at any time, see “Key Assign Menu, Setup Page” on page 36.

Keypad Programming, Assigning Intercom Keys

General

There are three methods to assign intercom keys with keypad programming. These methods are summarized below and

explained on the following pages.

Key Assignment using Keypad Numeric Entry: Using this method, you enter the panel number, party line number etc.

that you wish to assign to a key. This method requires that you know the number (not the name) of the port, party line etc.

that you wish to assign. Since most users do not have access to this information, this method of key assignment is not

recommended.

Key Assignment by Copying an Assignment: Using this method, you can copy an assignment from one key to another.

You can also use this method to transfer an incoming call to a talk key and/or listen key.

Key Assignment using Alpha Scrolling: Using this method, you scroll through lists of alpha names in the call waiting

window and select the name of the panel, party line etc. that you want to assign. Then you copy that name to a key. If

descriptive names have been assigned (using the intercom system configuration software) alpha scrolling is easiest to use.

Assigning Keys Using Keypad Numeric Entry

NOTE: Each programming step must be completed within 4-5 seconds. Otherwise, the programming sequence will

automatically quit.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Sin comentarios

RTS Cstrunk Especificaciones Pagina 32