RTS Cstrunk Especificaciones descargar pdf (Pagina 42)

4. Tap an intercom key to assign the selected auto function.

Tap up to assign all auto functions except All Call or DIM.

Tap down for All Call or DIM.

If the assignment is successful, the abbreviation for the auto function will appear in the alphanumeric display for that key.

However, if you try to assign an auto function to a key that already has that auto function assigned, the assignment will be

ignored. The assignment will also be ignored if scroll enable for auto functions has been disabled in AZedit, or if the key

you are trying to assign has been restricted in AZedit.

• You can tap CLR to exit and return to normal operation, or tap BACK to return to the auto function menu and

make more assignments.

• Trunked intercom systems: Do not select a matrix before assigning auto functions. All auto functions are

assigned using the local matrix menus.

• You do not need to run Save Cfg to store auto function assignments. These are stored in the intercom system.

• For descriptions of the auto functions, see “Glossary” on page 65.

Key Assign Menu, Key Gain

Use this menu item to adjust the listen gains for point-to-point or party line keys. The key that you want to adjust must already

have a point-to-point or party line listen assignment.

1. Press FWD or PGM to select Key Gain in the Key Assign menu.

Tap Key displays.

2. Tap UP on the key you want to adjust.

The current listen level displays in the call waiting window.

3. Press ↓↓ or ↑↑ to change the listen level.

You may tap additional point-to-point or party line keys to change their listen levels.

4. Tap CLR to quit.

NOTE: You do not need to run Save Cfg to store key gain changes. These are stored in the intercom system.

Key Assign Menu, Reset Vols

Use this menu item to simultaneously reset gains for all point-to-point or party line keys.

1. Press FWD or PGM to select Reset Vols in the Key Assign menu.

Done displays. All key gains are now reset to the default level.

2. Tap CLR to quit.

NOTE: You do not need to run Save Cfg after resetting key gains. These settings are stored in the intercom system.

Key Assign Menu, Setup Page

Use this menu item to change the setup page assignments on the KP-632 or EKP-632. One setup page is used for the top row

of keys, and another setup page is used for the bottom row.

1. Press FWD or PGM to select Setup Page in the Key Assign menu.

Page 1 displays.

2. Press ↓↓ or ↑↑ to select any of the following:

Page 1 Assign setup page 1 to the KP-632 or EKP-632.

Page 2 Assign setup page 2 to the KP-632 or EKP-632.

Page 3 Assign setup page 3 to the KP-632 or EKP-632.

Page 4 Assign setup page 4 to the KP-632 or EKP-632.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 103 104

Sin comentarios

RTS Cstrunk Especificaciones Pagina 42