RTS TR-240 Especificaciones descargar pdf (Pagina 59)

Li-Ion Batteries

The BP-240 Li-Ion battery pack used in the TR-240 beltpacks are

excellent batteries for portable, indoor/outdoor applications.

They have a high energy density (energy per weight) compared to

other rechargeable battery technologies (NiCd, NiMH, Alkaline,

gel Cells), are low maintenance, and offer superior performance

at low temperatures.

Battery Care

To ensure the long life and safe handling of the BP-240 Li-Ion

batteries, please note and adhere to the following precautions:

1. Store the BP-240s in a clean, cool, dry location away from

heat.

2. Do not burn or expose batteries to excessive heat such as

direct sunlight, fire, or other heat sources.

3. Do not disassemble, puncture, crush or subject the BP-240

(or TR-240 containing the battery pack), to excessive

impact.

4. Dispose of a BP-240 in proper Li-Ion recycling location.

Long Term Battery Storage

Li-Ion batteries retain nearly all their capacity if stored for long

term in dry, cool temperatures with only 30% to 50% of their full

charge capacity. They can loose up to 20% capacity if stored for

long term immediately after being fully charged.

The phrase “long term storage” is defined as no use of the device

for 1 month or longer. Care should be taken for Li-Ion batteries

when moving them into long term storage.

For the best performance, RTS recommends that the battery

packs be charged to 30 – 50% of capacity before being placed in

storage. This is the typical battery capacity left after 4 – 6 hours of

full-duplex wireless usage.

To place a BP-240 into long term storage:

1. After the last event:

a. If the battery pack was used for four hours or less then

do not recharge the battery pack.

b. If the battery pack was used for more than four hours

then recharge the pack for two hours (via direct charge).

2. Store the BP-240s in a clean, cool, dry location away from

heat. The recommended temperature range of the storage

location is 32 – 77 ºF (0 – 25ºC). The temperature of the

storage location should not rise above or below the

recommended storage temperature.

3. Every 6 months, charge the BP-240s for three hours (via

direct charge) then remove them from charging. Do not fully

charge. This procedure prevents the battery packs from over

discharging and helps maintain the battery’s performance.

Battery Transportation

One of the major risks associated with transportation of batteries

is short circuit of the battery as a result of the battery terminals

coming into contact with other batteries, metal objects or

conductive surfaces.

The BP-240 features a special design with recessed battery

terminals to avoid this scenario from happening. The BP-240

battery pack also contains internal safety circuits itself to prevent

any major risk associated with shorted terminals. However, care

should be taken to prevent short circuits or damage to terminals

when transporting the batteries. The following guidelines must be

followed to ensure safe transportation of the BP-240 rechargeable

Li-Ion battery packs.

1. Transport the BP-240 battery pack while it is locked into a

TR-240 beltpack.

2. Transport spare BP-240 battery packs in a padded case,

separated from one another with non-conductive materials

(i.e., a plastic bag).

3. Do not transport batteries bundled together.

Cleaning

The BTR-240 system should only be cleaned with a soft and

damp cloth. Never spray chemicals or cleaning solvents directly

onto the units.

Temperature and Humidity

The BTR-240 system is robust and designed to work in a wide

range of environmental conditions. When possible, the BTR-240s

and TR-240s should be stored and used in an environment as close

to indoor room temperature and humidity conditions as possible.

NOTE: Always perform system setup and configuration

indoors and before deployment. Especially for

operation of the devices in temperatures that are near

the system limitations.

The devices should never be exposed directly to extreme weather

conditions. The BTR-240 base station and power supply should

be located where they will not have exposure to dust and

moisture. When using the TR-240 in conditions where moisture

may occur, the protective beltpack case should be used. See

“Accessories and Replacement Parts” for ordering information.

Section 9 - Maintenance and Care

9-1

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 85 86

Comentarios a estos manuales

Sin comentarios

RTS TR-240 Especificaciones Pagina 59

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS TR-240