RTS TR-240 Especificaciones descargar pdf (Pagina 30)

To modify the 2W Settings:

a. Using the <UP>/<DOWN> buttons, navigate the cursor

next to the option “2W Settings” and press <SET> to select

the menu.

The 2W intercom options menu is displayed and the

current status is flashing.

b. Using the <UP>/<DOWN> buttons, find the desired

intercom type (off, Telex, RTS, or ClearCom) and press

<SET> to select.

CAUTION:

Do not switch between 2-wire types when the BTR-240 base

station is connected to a powered 2-wire system. The voltage

differences between systems may cause damage to the

equipment.

The intercom type will stop flashing indicating that the

type has been set. Now, the intercom channels will flash

indicating that they are ready to be modified.

c. Using the <UP>/<DOWN> buttons, find the desired

intercom channels to activate and press <SET> to select.

The menu screen will stop flashing and the LCD will

pause for approximately 3 seconds while the 2W is

configured. The LCD will automatically go back to the

2W Intercom Menu Screen after this process is complete

(return to Step 4).

To modify the 2W Levels:

d. Using the <UP>/<DOWN> buttons, navigate the

cursor next to the menu option “2W Levels” and press

<SET> to select the menu.

The levels are displayed only for the active intercom

channels. If no intercom channels are active, this menu

option will not be accessible.

e. Using the <UP>/<DOWN> buttons, navigate to the

desired level to modify and press <SET> to select it.

The corresponding cursor and level number will begin

flashing which indicates that the level can now be

modified.

f. Use the <UP>/<DOWN> buttons to move the bar level up

and down to the desired audio level and press <SET> to

select it.

g. From the 2W Levels Screen, the user has four options:

i. Press <SET> again to re-adjust the same level

(return to Step 4f).

ii. Use the <UP>/<DOWN> buttons to navigate to

another level to modify (return to Step 4e).

iii. Press the <MENU> button to go back to the 2W

Intercom Menu Screen (return to Step 4).

iv. Press and hold the <MENU> button for 1/2 second

to return directly to the Status Screen.

5. When finished editing, from the 2W Intercom Menu Screen,

the user has two options:

a. Press the <MENU> button to go back one menu screen

(return to Step 3).

b. Press and hold the <MENU> button for for 1/2 second to

return directly to the Status Screen.

5-6

->2W IC1 In: 08->2W IC1 In: 08

2W IC1 Out: 11 2W IC1 Out: 11

2W IC2 In: 082W IC2 In: 08

2W IC2 Out: 112W IC2 Out: 11

Figure 5-20

2W Levels Menu Screen

2W Intercom: RTS2W Intercom: RTS

IC1: ON IC2: ON IC1: ON IC2: ON

Figure 5-19

2W Channel Settings Screen

2W Intercom: Off2W Intercom: Off

IC1: OFF IC2: OFF IC1: OFF IC2: OFF

Figure 5-18

2W Type Settings Screen

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 85 86

Comentarios a estos manuales

Sin comentarios

RTS TR-240 Especificaciones Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS TR-240