RTS TR-240 Especificaciones descargar pdf (Pagina 55)

3. Connect the BTR-240 or TR-240 device to the computer by

using the supplied green Ethernet cable.

4. Turn on the BTR-240 or TR-240 device and allow it to boot

completely.

NOTE: The TR-240 needs to be booted in “wired mode” in

order to activate the Ethernet port. If it isn’t already,

press and hold the < 2 > button while the beltpack is

booting.

5. Start a “Command Prompt” console window.

–

Start -> Programs -> Accessories

–

Click on Command Prompt.

6. In the console window, type the following command:

–

“telnet 192.168.1.X” <Enter>

NOTE: “X” is the last digit of the IP address on the device

sticker.

7. After approximately 20 seconds, the device will respond

with a login request. Enter the following information:

–

Password: legacy <Enter>

NOTE: The password entry does not give user feedback to the

screen.

8. After a successful login, the User Menu Options will be

displayed.

NOTE: If the computer says, “failed to connect” after typing

the “telnet” command in Step 6. First wait 15 seconds

and try the command one more time. If that does not

work, turn off the BTR-240 or TR-240 device, check

the settings in the “Network Configuration” section,

and repeat all the instructions in the section “Logging

into a Device”.

NOTE: The “backspace” keyboard button may not work on

all computers using Telnet. If this is the case, use

the “delete” button instead.

Software Version

From the User Menu Options screen (Figure 8-8), the software

version of the unit is displayed on the top line. Please note the

revision letter, number and the release date. These three items will

change if the software is ever modified or upgraded. For example,

the beltpack login screen in Figure 8-8 has a software revision

letter of “A”, revision number of “1.0.0”, and a release date of

“FEB 25, 2011”. Similar numbers will be shown when logging

into a BTR-240.

NOTE: For software version 2.0.0 and greater, a letter to

indicate the region is appended to the revision number.

For example, "B(2.0.0)n", where the "n" is for North

America. Other region codes are: "e" for Europe &

China, "j" for Japan and "k" for Korea.

The second line of the User Menu Options screen indicates the

system model and location. For example, the beltpack login in

Figure 8-8 indicates that it is a TR-240 and that it has been

configured for use in North America.

8-3

Figure 8-6

Telnet Command

Figure 8-7

Figure 8-8

User Menu Options (TR-240)

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

Comentarios a estos manuales

Sin comentarios

RTS TR-240 Especificaciones Pagina 55

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS TR-240