RTS TR-240 Especificaciones descargar pdf (Pagina 42)

System Restore

The beltpack has the ability to restore all the settings and

parameters back to the factory default state. The settings that are

restored include the following:

•

Mode of Operation

•

Talk Mode

•

Microphone Gain

•

Sidetone Level

•

User Configurations (described in Section 8)

–

IP address

–

SSID

–

Audio Encryption Key

–

Wireless Encryption Key

–

MAC filtering

–

Squelch

–

Out of Range Alert

–

Full-Duplex

Key Sequence: Press and hold <1> + <TALK> + < 2 >

while booting. Release the buttons once the

voice prompt “Factory Reset” is heard in the

headset.

When the factory reset operation has been finished, the beltpack

will return to normal operation in the wireless (default) mode.

Using TR-240 beltpacks as Replacements for

TR-24 beltpacks

A user with an existing system comprised of TR-24 beltpacks

may replace or add a TR-240 beltpack to their system. However,

the TR-240 must be properly configured to operate with other

TR-24 beltpacks.

1. IP Address Verification

• Ensure that the TR-240 does not have the same

IP address as any other system devices. If so,

refer to Section 8 for instructions on how to

change the IP address of the TR-240.

2. Change the SSID to "TELEX24"

• The default SSID of the TR-24 beltpacks is

"TELEX24" and a new TR-240 must be changed

to match. Refer to Section 8 for instructions on

how to change the SSID of the TR-240.

3. Disable 802.11 WEP Encryption

• The TR-24 beltpacks do not support wireless

encryption and a new TR-240 must be changed

to match. Refer to Section 8 for instructions on

how to disable the 802.11 WEP encryption of the

TR-240.

6-4

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 85 86

Comentarios a estos manuales

Sin comentarios

RTS TR-240 Especificaciones Pagina 42

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS TR-240