
7.3.9 MENUS, KEY ASGN, REDIAL (FOR KP-12 ONLY)
You use this menu item to assign a redial key for use along with one or more phone keys. If the
KP-12 has multiple phone keys assigned, the redial key redials the last number dialed on the last
phone key that was used.
1. When you click on REDIAL, the point-to-point scroll list will display for the currently
selected intercom system
1
.
2. Rotate the SELECT control to locate one of the intercom ports to which the TIF-951 is
connected, then click SELECT. The call waiting window will display TAP KEY.
3. Tap the intercom key that you want to use as a redial key. The name RDL will appear in the
display above the key.
☞
If restrictions against key assignment have been imposed using the intercom system
configuration software the intercom key may ignore the assignment. In this case, contact the
intercom system administrator if you need to make a change.
☞
Unlike most other types of key assignments, which let you select the activation method (talk,
listen, talk + auto follow etc.) redial keys are always assigned as talk keys with auto-listen.
When you activate the key both talk and listen will be activated.
4. Double-click the SELECT control to return to the previous menu level. Or, press and hold the
SELECT control for about two seconds to exit menu mode.
5. For a redial key, the port assignment is automatically uploaded to the intercom system and
saved to the on-line configuration. However, the redial function itself must be saved locally
using the SAVE CFG command. See “SERVICE MENU, SAVE CFG”, page
45. Otherwise,
the redial function will be lost when the keypanel is turned off.
7.4 MENUS, KEY OPT MENU (KEY OPTIONS)
7.4.1 GENERAL DESCRIPTION
You use the KEY OPT menu to modify the operation of selected keys. Changes that you make in
this menu do not affect talk and listen assignments, but only the way that keys operate. Any
changes that you make in this menu must be saved internally in the keypanel if you want them to
be retained for future use. Otherwise, the settings will be lost when the keypanel is turned off. (See
“SERVICE MENU, SAVE CFG”, page
45.)
☞
In keypanel versions prior to version 24, key options did not stay with keys as setup pages
were changed. This meant that if you changed setup pages, the key assignments on the new
active setup page would take on the key options from the previously used setup page. This has
been changed so that key options now track not only the keys to which they are assigned, but
also the setup page. (For version information, see TOP LEVEL MENU, DISPLAY,
VERSION, page
21.)
36 User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys
1
If the intercom system is trunked, and the TIF-951 is located in another intercom system,
rotate the select control to display ICOM followed by the desired intercom system name, then
click SELECT. Wait for the point-to-point list to be obtained from the selected intercom
system.
Comentarios a estos manuales