5 TELEPHONE OPERATION (KP-12 ONLY, REQUIRES OPTIONAL TIF-951
TELEPHONE INTERFACE)
If the intercom system is equipped with an optional TIF-951 Telephone Interface, one or more in-
tercom keys on the KP-12 keypanel may be assigned for use as phone keys. There are three types
of phone key assignments:
●
All-purpose phone key (usually identified as TEL1, TEL2 etc.): may be used for
manual dialing, for last number redial, and for auto dialing any of ten stored phone
numbers.
●
Redial key (RDL): redials the last number when activated.
●
Autodial key (ADL0 - ADL9): dials one of ten previously saved autodial numbers
when activated.
The following paragraphs describe how to use each of these three types of phone keys.
5.1 ALL-PURPOSE PHONE KEY OPERATION
☞
The following paragraphs assume that a phone key has already been set up and is ready for
use. If a phone key has not been set up, see “KEY ASGN MENU, PHONE” on page 35.
☞
Names for general purpose phone keys are assigned, like any other intercom port name, using
the intercom system configuration software. Suggested names are TEL1, TEL2 etc. to
distinguish phone keys from other types of intercom keys.
5.1.1 MANUAL DIALING WITH AN ALL-PURPOSE PHONE KEY
1. Tap the phone key to begin your call. This will place the keypanel in dial mode: the CALL
indicator will turn on, and MAN DIAL (manual dial) will display in the call waiting window.
You should also hear the dial tone. (Note: You may hang up the phone line at this time by
simply tapping the phone key again.)
2. Click the SELECT control to select MAN DIAL. The twelve intercom keys can now be used
to dial a telephone number. Each key corresponds to the number printed next to it on the front
panel. If the KP-12 has alphanumeric displays, the key numbers are displayed above each key.
3. Begin dialing the number by tapping the appropriate keys. After you dial the first digit, END
DIAL will appear in the call waiting window. When you have completed dialing, click the
SELECT control to select END DIAL. This will return the KP-12 to normal operating mode.
If the called party answers, proceed with your conversation as for any other intercom call. To
end the phone call, hang up as described below.
5.1.2 HANGING UP
1. Rotate the SELECT control to display HANG UP, then click SELECT. The call waiting
window will display TAP KEY.
2. Tap the phone key. The talk and listen indicators will turn off and the call will terminate.
5.1.3 RECEIVING A PHONE CALL
The phone key will flash red. Tap the key to answer the call. Hang up as previously described
when finished.
16 User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys
(90 paginas)
(36 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales