4.3 HEADSET / SPEAKER / PRGM SELECTION AND VOLUME ADJUSTMENT
You can select operation with a headset (HDST). Or, you can select operation with the internal
speaker (SPKR) and a microphone connected at the panel microphone jack. To select either
HDST or SPKR, click the VOLUME control once. The indicator will be lit red for whichever one
is currently selected. Then, rotate the VOLUME control to set the level.
KP-12 Only: If the KP-12 has an optional Rear Connector Module, and an external program
source is connected, you can adjust its volume independently of the intercom volume. To change
the program volume (KP-12 only) double-click the VOLUME control. Then, rotate the VOLUME
control to adjust the program level in the headset or speaker, whichever is currently activated.
Click the VOLUME control once to quit PGM adjustment.
☞
After you have set everything the way you want it, you can save your settings using the
SAVE CFG command, page
45. The keypanel will then always power-up with your settings.
☞
If you are using a headset with ear cushions that fully enclose the ears, you may also wish to
make adjustments to the sidetone level. See “SERVICE MENU, SIDETONE”, page
46.
4.4 FLASHING CALL INDICATOR
Occasionally, a keypanel may call, and there won’t be a key assigned to talk back to that caller. In
this case, the caller’s name will flash in the call waiting window, and the CALL indicator will flash
red. Press and hold the SELECT control to talk back. The caller’s name will be cleared after a pe-
riod of time, but it will be retained in the call list. The call list is a short list of the last four names
that have appeared in the call waiting window. To access the call list, simply rotate the SELECT
control until you locate the caller’s name, then press and hold SELECT to talk. As new calls are
received in the call waiting window, they are added to the call list, and old callers will be dropped.
If you wish to create a permanent key assignment from a name in the call waiting window, use
“Copy Call Waiting”, below.
4.5 COPY CALL WAITING
You can copy a name from the call waiting window to an intercom key to create a new talk key as-
signment. While the desired name is displayed, press and hold the SELECT control, then tap an
intercom key.
☞
When you use this method, a talk-only key assignment will b e created. If you want the key to
also have a listen assignment you should use the KEY ASGN menu. See page
28.
☞
If restrictions against key assignment have been imposed using the intercom system
configuration software the intercom key will ignore the assignment. In this case, contact the
intercom system administrator if you need to make a change.
☞
All new key assignments that you create are automatically uploaded to the intercom system
and saved to the on-line configuration.
User Manual, DKP-8, DKP-12 and KP-12 Keypanels with Push-button Keys 15
(90 paginas)
(36 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales