RTS XCP-48-RJ45 Manual de usuario descargar pdf (Pagina 19)

CHAPTER 2

Cronus Menu Structure

Cronus Menu System Introduction

1. On the front panel of the Cronus system, tap the ENC1 encoder knob.

SET FRAME ID appears.

2. Turn the ENC1 encoder knob clockwise to scroll forward or counter-clockwise to scroll backwards through the list of

menus.

By scrolling, you will see Status or Version.

3. Tap the ENC1 encoder knob to enter a menu.

Within a menu:

1. Turn the ENC1 encoder knob clockwise to scroll forward, and counter-clockwise to scroll backward through a list of

menus.

2. Tap the ENC1 encoder knob to enter a menu.

Tap the ENC1 encoder knob twice to exit a menu or press the encoder knob for 3 - 5 seconds to exit the menu system.

Configure Menu

Set Frame ID

In a single frame Cronus system, the frame will always be Stand Alone (or the Master frame). In a multi-frame system, the first

time Cronus is powered on, each frame will show as Frame 1 and will need to be configured, either manually or by autoconfig,

to designate which frame it is.

To set the FRAME ID, do the following:

1. Tap the ENC1 knob.

Configure appears.

2. Tap the ENC1 knob.

Frame ID appears.

3. Tap the ENC1 knob.

Set Frame ID displays.

4. Tap the ENC1 knob.

SLAVE Frame Set Slave ID displays.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 106 107

Sin comentarios

RTS XCP-48-RJ45 Manual de usuario Pagina 19