RTS XCP-24 Manual de servicio Pagina 90
- Pagina / 114
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
12 RVON-1 User Manual
Configure the RVON-1 from the KP-32
To use the RVON-1 with the KP-32, the KP-32 firmware must be at V 2.0.0 or higher. In turn, the firmware
requires that larger flash chips be used as well. For more information, see page 9.
TOP LEVEL MENU, SERVICE, RVON SETUP
Set the IP Address from the Service Level Menu
The RVON-1 card, when shipped has a default IP Address already configured. This must be changed
in order for the RVON-1 card to function properly because the pre-configured IP Address may not
work with your network.
To set the IP Address, do the following:
1. On the KP-32, press Menu.
The top level menu appears .
2. Using the
↓↓↓↓
↓↓↓↓
↓↓, scroll to Service.
3. Press PGM.
The Service menu appears.
4. Using the
↓↓↓↓
↓↓↓↓
↓↓, scroll to RVON Setup.
5. Press PGM.
The IP Address menu item appears.
6. Press PGM.
The actual IP Address appears.
7. Enter the first number in the IP Address.
This activates the first octet of the IP Address and clears the rest of the IP Address.
8. Press PGM.
This confirms the first octet in the IP Address and moves you to the second octet.
NOTE: Press PGM to skip over any octet that does not need modifications.
9. Repeat steps 7 and 8 until the entire IP Address is entered.
10. Press PGM.
The Netmask menu item appears
.
NOTE: Once you have entered the IP Address, you will then enter the Netmask. The Netmask is a
string of numbers similar to an IP Address, except that it masks or screens out the network
part of an IP Address so that only the host computer part of the address remains
(for example, 255.255.255.0).
11. Press PGM.
The actual Netmask appears.
12. Enter the first number in the Netmask.
This activates the first octet of the Netmask and clears the rest of the Netmask.
13. Press PGM.
This confirms the first octet in the Netmask and moves you to the second octet.
NOTE: Press PGM to skip over any octet that does not need modifications.
14. Repeat steps 13 and 14 until the entire Netmask is entered.
15. Press PGM.
The Gateway IP Address menu item appears.
- USER INSTRUCTIONS 1
- PROPRIETARY NOTICE 2
- COPYRIGHT NOTICE 2
- UNPACKING AND INSPECTION 2
- WARRANTY INFORMATION 2
- CUSTOMER SUPPORT 2
- RETURN SHIPPING INSTRUCTIONS 3
- TABLE OF CONTENTS 5
- Telephone Operation 4-1 6
- KP-632 Menu System 6-1 6
- Specifications 7-1 7
- Mode 2 Operation 10-1 8
- Glossary 11-1 8
- Appendix 12-1 8
- NTRODUCTION 9
- GPI/Connector Module 10
- Headsets 11
- EKP-632 Expansion Keypanel 11
- LCP-632 Level Control Panel 11
- MCP-90 Panel Microphone 11
- 1-4 KP-632 User Manual 12
- NSTALLATION 13
- Address Switch Setting 14
- Address Setting for Zeus 15
- Address Setting for ADAM CS 15
- CS Intercom Systems 16
- Connections 17
- Power Supply Connector 18
- Headset Connector 18
- Panel Microphone Connector 19
- 2-8 KP-632 User Manual 20
- PERATION 21
- Intercom Keys and Displays 22
- Intercom Key Operation 23
- 3-4 KP-632 User Manual 24
- Muting the Microphone 25
- Call Waiting Operation 25
- 3-6 KP-632 User Manual 26
- ELEPHONE 27
- KP9X Redial Sequence 28
- KP9X Autodial Sequences 28
- Manual Dialing 29
- Autodial 30
- ROGRAMMING 31
- Test Keys and Displays 32
- 1 Tap the E-PNL key 33
- 3 Tap the PGM key 33
- General Procedure 34
- 1 Tap COPY 36
- Clearing a Key Assignment 37
- 5-8 KP-632 User Manual 38
- KP-632 M 39
- 6-2 KP-632 User Manual 40
- MENU SYSTEM, KEY ASSIGN MENU 41
- Key Assign Menu, Matrix 42
- Key Assign Menu, Pt-to-Pt 42
- Not Avail 43
- Key Assign Menu, Key Gain 44
- Key Assign Menu, Reset Vols 44
- KEY OPTION MENU 45
- Key Option Menu, Key Groups 46
- Clearing a key group 46
- SERVICE MENU 47
- Service Menu, Disply Dim 48
- Service Menu, DSP Func 48
- Filtering 49
- Metering 49
- Service Menu, Hdst Sel 50
- Service Menu, LCD Bright 51
- Service Menu, LCP-632 51
- Service Menu, Local GPIO 52
- Service Menu, Matrix Out 53
- Service Menu, Mic Select 54
- Service Menu, Min Volume 54
- Service Menu, Mod Assign 54
- Service Menu, Output Level 55
- Service Menu, Reset Cfg 56
- Service Menu, Save Cfg 56
- Service Menu, Sidetone 56
- Service Menu, Test Panel 56
- Service Menu, Tone Gen 56
- PECIFICATIONS 57
- Headset Connector (Dynamic) 58
- Power Input Connector 59
- Connectors 59
- Expansion Connector 59
- LCP Connector 60
- Relay 1 & 2 Out 60
- Relay 3 & 4 Out 60
- OC 1 & 2 Out (J2) 61
- Foot Switch/Speaker 62
- EFERENCE 63
- KP9X PHONE OPERATION 64
- KP9X Dial Sequence 65
- 8-4 KP-632 User Manual 66
- Tone Gen 68
- 9-2 KP-632 User Manual 68
- Sidetone* 68
- Test Panel 68
- 9-4 KP-632 User Manual 70
- 10-2 KP-632 User Manual 72
- S ECTION 73
- KP-632 User Manual 74
- 11-4 KP-632 User Manual 76
- Special List 76
- Stacked Key 76
- Talk Level 1 77
- Talk Level 2 77
- Trunking 77
- 11-6 KP-632 User Manual 78
- RTS Voice Over Network 79
- Family of Keypanels 79
- ADDENDUM 79
- 2 RVON-1 User Manual 80
- RVON-1 User Manual 3 81
- 4 RVON-1 User Manual 82
- RVON-1 User Manual 5 83
- 6 RVON-1 User Manual 84
- Introduction 85
- Switch 1: Reserved 86
- RVON-1 User Manual 9 87
- RVON-1 Ethernet Connection 88
- CSI Connection 88
- TOP LEVEL MENU, RVON CONN 91
- The download begins 96
- Appendix A 97
- Basic Network Configuration 97
- Table 1. Packet Translation 99
- Table 2. Packet Translation 99
- 22 RVON-1 User Manual 100
- TELNET <IP Address> 107
- A prompt appears 108
- An MXP prompt appears 108
- RVON-1 User Manual 33 111
- RVON-1 User Manual 35 113
Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS XCP-24
(12 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.024 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales