RTS XCP-24 Manual de servicio descargar pdf (Pagina 25)

3-5

click the "Advanced" tab. Place a check next to "Port is TIF". Remember to send the change to the

intercom system.)

Muting the Microphone

Tap the MUTE key upward to turn microphone muting on or off.

The Vol. Sel. display alternates between

Hdst

and

Mute

(or between

Spkr

and

Mute

) while the

microphone is muted.

Note

While muting is on, you cannot be heard on the intercom, or by anyone on the telephone, or by

any device connected to the mic preamp output of the optional connector module.

Call Waiting Operation

Occasionally, a keypanel may call, and there won't be a key assigned to talk back to that caller. In

this case, the caller's name will appear in the Call waiting window. Press down and hold the Call

waiting key to talk back.

To clear a name from the Call waiting window, tap "up" on the Call waiting key.

If a second call is received in the Call waiting window while a caller name is already displayed,

the Call waiting LED will flash red. To answer the second call, tap "up" to clear the first name,

then hold the key down to talk to the second caller.

Note

By default, only the names of callers who are not currently assigned to intercom keys will appear

in the Call waiting window. Alternatively, you can force all caller names to display in the Call

waiting window. This is controlled either by DIP switch 2 on the ADAM Master Controller card

or by the ADAMedit check box titled "Always stack callers in call waiting window". (ADAMedit

Options menu, Intercom Configuration, Options tab. Note: the setting in ADAMedit overrides the

DIP switch 2 setting on the Master Controller card.) If your intercom system has mostly

keypanels with alphanumeric displays, we recommend that you do not stack all callers in the Call

waiting window.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 113 114

Sin comentarios

RTS XCP-24 Manual de servicio Pagina 25