RTS XCP-24 Manual de servicio Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 114
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
6-11
Filtering
Filtering lets you add a 9.6 kHz notch filter to one or more audio sources. This can be useful in a
few cases when the keypanel data port signal is being heard in the audio line due to cable routing
problems.
1 Select
Filtering
, then tap PGM.
2
Microphone
displays. Press ↓↓ or −− .to display any of the following items:
Microphone
Matrix
Aux 1
Aux 2
3 Tap PGM.
4
None
displays to indicate that no filtering is selected.
5 Press ↓↓.
6
Notch
displays.
7 Press PGM.
8
Notch
displays. The arrow indicates that the notch filter is now selected.
9 Tap CLR to exit.
10Run "Service Menu, Save Cfg", to save the change.
Gating
Gating minimizes or eliminates background noise problems by shutting off an audio source when
the sound level drops below a certain threshold.
1 Select
Gating
, then tap PGM.
2
Microphone
displays. Press ↓↓ or −− .to display any of the following items:
Microphone
Matrix
Aux 1
Aux 2
3 Tap PGM.
4
Gating
displays.
5 Tap PGM.
6
Gating
displays. The arrow indicates that gating is now selected.
7 Tap CLR to exit.
8 Run "Service Menu, Save Cfg", to save the change.
Metering
Metering lets you use the Vol. display as an LED bar graph meter to monitor an audio signal for
about 1 minute.
1 Tap PGM.
Microphone
displays. Press ↓↓ or −− .to display any of the following items:
Microphone
Matrix
Aux 1
Aux 2
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 113 114

Comentarios a estos manuales

Sin comentarios