RTS KP-12 Manual de usuario descargar pdf (Pagina 56)

48 Menu Mode KP-12 Keypanel

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

How MODS Work

Keypanels, expansion panels and level control panels in this product line all use a system of MODS. MODS are simply groups

of 4 consecutive intercom system keys and their associated displays (or groups of 4 control knobs in the case of LCPs). Since

the DKP-8 and DKP-12 keypanels are typically used without expansion panels and level control panels, only a few MODS are

used. If you need to assign MODS on a DKP keypanel, see “Menus, SERVICE, MOD ASGN” on page 47, and set MODS 1

and 2 (DKP-8) or 1-3 (DKP-12) as summarized in Table 5 .

The KP-12 keypanel, on the other hand, can be used with various combinations of expansion panels and level control panels.

In this case, you need to program each group of four (4) keys on the KP-12 and any connected EKPs to a unique MOD

number.

If you are using LCP level control panels to adjust listen levels for intercom keys, you want to make sure that the MOD

numbers for the level control knobs match the MOD numbers for the intercom keys. The LCP MOD numbers cannot be set

from the KP-12. They must be set by replacing the internal ROM (Read Only Memory) in the LCP. Table 5 shows the default

MOD numbers that are programmed into the various LCPs.

NOTE: The default settings for LCPs work when one LCP-12 is used with a KP-12, or when one LCP-16 or LCP-20 is

being used with one EKP-16 or EKP-20. However, there are two (2) situations where you need to change the

ROM in and LCP:

• when you want to use an LCP-12 with and EKP-12

• when you are connecting more than one (1) EKP, and you want to use LCPs with each EKP. If you need

to change MOD numbers in an LCP, contact you intercom dealer for assistance.

To set up KP-12 and EKP MOD numbers see “Menus, SERVICE, MOD ASGN” on page 47.

TABLE 5. Default Module Number Assignments

Keypanel/LCP-12 Default MODE Assignments

MOD 1 Keys 1-4

MOD 2 Keys 5-8

MOD 3 Keys 9-12 (not used for DKP-8

MOD 4

Keys 13-16 (Do not assign this MOD. It is used exclusively for the SELECT control and call

waiting display on keypanels.)

EKP-12 Default MOD Assignments

MOD 5 Keys 17-20

MOD 6 Keys 21-24

MOD 7 Keys 25-28

EKP-16/LCP-16 Default MOD Assignments

MOD 5 Keys 17-20

MOD 6 Keys 21-24

MOD 7 Keys 25-28

MOD 8 Keys 29-32

EKP-20/LCP-20 Default MOD Assignments

MOD 5 Keys 17-20

MOD 6 Keys 21-24

MOD 7 Keys 25-28

MOD 8 Keys 29-32

MOD9 Keys 33-36

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

Comentarios a estos manuales

Sin comentarios

RTS KP-12 Manual de usuario Pagina 56

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS KP-12