RTS KP-12 Manual de usuario descargar pdf (Pagina 47)

KP-12 Keypanel Menu Mode 39

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

Menus, KEY ASGN, LOCAL I/O (For KP-12 Only)

A General Purpose Interface (GPI) module must be installed in the KP-12 to access this menu. (See Table 3, “KP-12

Keypanel Reference View (Push-button version shown).,” on page 7.) Use this menu to assign the outputs of the GPI Module

for activation along with regular key assignments.

To assign a GPI/O, do the following:

1. Using the SELECTOR control, select LOCAL I/O.

LRY1 (local relay 1) appears in the call waiting window. For other selections, turn the SELECT control to display

LRY2, OC1 (open collector output 1) or OC2.

2. Display the desired selection, then tap the SELECT control.

3. Select ASSIGN or CLEAR, then tap the SELECT control.

4. Tap an intercom key.

NOTE:

• Each local relay or open collector output can only be assigned to one key at a time.

• A relay or open collector output will only activate if the key it is assigned to also has a regular key

assignment.

5. Double-tap the SELECT control to return to the previous menu level.

Press and hold the SELECT control for two (2) seconds to exit menu mode.

NOTE:

• You must save Local I/O assignments using the SAVE CFG command. See “Menus, SERVICE, SAVE

CFG” on page 52. Otherwise, any Local I/O will be lost when the keypanel is turned off.

• An intercom key must already have one of the following key assignments in order for a Local I/O

assignment to function: IFB, ISO, PL, P-P, or SPCL.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Sin comentarios

RTS KP-12 Manual de usuario Pagina 47