RTS KP-12 Manual de usuario descargar pdf (Pagina 53)

KP-12 Keypanel Menu Mode 45

Bosch Security Systems, Inc.

User Manual

F.01U.193.243

Rev. 11

Menus, SERVICE MENU

General Description

Use this menu to set the logical keypanel address during installation and to set general operating features such as display

brightness, etc. Any changes you make in this menu must be saved locally if you want them to be retained for future use.

Otherwise, the settings are lost when the keypanel is turned off. See “Menus, SERVICE, SAVE CFG” on page 52.

Menus, SERVICE, DIMMER

DIMMER sets the brightness for the front panel displays.

1. After selecting DIMMER, turn the SELECT control to set the brightness.

The new brightness level displays in the call waiting window.

2. When the brightness is set to the desired level, tap the SELECT control to activate the change for all the displays.

3. Double-tap the SELECT control to return to the previous menu level.

Press and hold the SELECT control for two (2) seconds to exit menu mode.

NOTE:

• Remember to save you changes if you want them retained for future use. See “Menus, SERVICE, SAVE

CFG” on page 52.

Menus, SERVICE, FOOT SW (with GPI module ONLY)

NOTE: The foot switch must be connect at J6 (Opto-4 & Opto-3) on the back of the KP-12. It also must be cabled across

pins 5 & 9 of the Opto-4 & 3 DB-9 connector.

When the Foot switch is enabled, activated talk keys enter standby mode and the talk LED turns orange. Once you press the

foot switch, the crosspoint is closed and the Talk LED turns green for normal operation.

To change the key type, do the following:

1. Select FOOT SW.

2. Turn the SELECT control to choose either on or off, and tap SELECT control.

3. Double-tap the SELECT control to return to the previous menu level.

Press and hold the SELECT control for two seconds to exit the menu mode.

NOTE: Remember to save your changes if you want them retained for future use. See “Menus, SERVICE, SAVE

CFG” on page 52..

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 67 68

Sin comentarios

RTS KP-12 Manual de usuario Pagina 53