RTS XCP-ADAM-MC Manual de servicio descargar pdf (Pagina 146)

Telex Communications

146

From the Options menu, select Preferences.

1. Click the Alphas tab.

To Activate:

2. Select the Automatically check for duplicate alphas after opening a file, and Prompt before checking

for duplicate alphas check box.

To Deactivate:

3. Deselect the Automatically check for duplicate alphas after opening a file, and Prompt before

checking for duplicate alphas check box.

You can also select Check for duplicate alphas... in the Alphas menu at any time to identify and correct duplicate

alphas in your setup file or in the online configuration.

Communications

The communications screen allows you to select the COM port and baud rate for communication between the PC and

the intercom system.

To access the Communications screen, do the following:

1. From the Options menu, select Communications.

The Communications screen appears.

Communication Status Pane

The Communication Status Pane indicates the data transmission activity between the configuration computer and

the intercom system.

The first green light in the lower right window indicates the computer is sending data to the COM port specified in the

Communications dialog. This indicator flickers occasionally whether the computer is connected to the intercom

system or not, since the computer always periodically polls the port.

The second green light in the lower right window indicates the computer is receiving data from the intercom system.

This indicator is active only when the computer is connected to the intercom system and the configuration software is

in ONLINE mode or SERVER mode.

Connect on Startup

AZedit automatically attempts to log onto the intercom system whenever the program is started.

1 2 ... 141 142 143 144 145 146 147 148 149 150 151 ... 181 182

Sin comentarios

RTS XCP-ADAM-MC Manual de servicio Pagina 146