RTS XCP-ADAM-MC Manual de servicio descargar pdf (Pagina 104)

Telex Communications

104

7. From the UPL Resource drop-down box, select the first UPL resource you created (for example,

PL1).

8. From the Output Action Type drop down box, select Force Talk Key.

9. In the Port # field, enter or select the port number where the talk key is located.

10. In the Key # field, enter or select the key number you want to activate.

11. Click Next.

The next UPL statement appears in the Edit screen.

12. In the Comment field, enter a description of the UPL statement to remind you what it is being used

as (for example, Party Line 2).

13. From the Input A Type drop-down box, select UPL Statement.

Because you are creating a counter-action to UPL Statement 1, you are going to use that

statement as the Input (or condition) for the second UPL Statement.

14. Select the Invert Input A check box.

15. In the Statement # field, verify the field shows the UPL statement you just created.

16. From the Output Action Type drop-down box, select Force Talk Key Open.

17. In the Port # field, enter or select the same port # you used for the first UPL statement.

18. In the Key # field, enter or select the same key # you used for the first UPL statement.

Now, repeat steps 1 through 18 substituting party lines 3 and 4 where party lines 1 and 2 were.

19. Send these changes to the intercom system.

The statements you created will work as follows - When the PL1 key on the director's keypanel is currently off, this

means the first UPL statement is FALSE. Therefore, the PL1 Talk key will not be activated. However, the second

statement is true, and this will Force the PL1 talk key off. When the PL1 key is pressed, the first UPL statement

become true, which forces the talk key on. Since the second UPL statement is now false, it is ignored. When the PL1

key is release, the second UPL statement again becomes true, which forces the PL 1 key on the directors keypanel

to be turned off.

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 181 182

Sin comentarios

RTS XCP-ADAM-MC Manual de servicio Pagina 104