RTS XCP-ADAM-MC Manual de servicio descargar pdf (Pagina 57)

4. Activate the TIF talk key (talk LED turns green). The "ON" LED at the TIF-951 will activate, and you

should hear dial tone at the KP-32.

5. Dial the telephone number. Digits scroll in the display above the TIF talk key.

6. When the far end answers, you can dial additional digits (to access a mail system or automated

response system, etc.). When finished dialing, momentarily turn off the TIF talk key to end dialing

mode (talk LED turns red).

7. Turn the TIF talk key back on for conversation.

KP9X Redial Sequence

1. Tap the

PHONE

key to activate dialing mode.

2. Tap "up" on the TIF key to activate listen.

3. Tap

CLR

. The last phone number will redial.

4. After the number has dialed, click the

PHONE

key to end dialing mode.

5. If the far end answers, tap "down" on the TIF key to activate talk.

6. Use the KP9X hang-up sequence to hang up.

KP9X Autodial Sequences

Storing an Autodial Number in the TIF-951

1. Tap the

PHONE

key.

2. Tap the TIF talk key to latch it on.

3. Using the number keys on the keypad, dial the phone number that you want to store. The entire phone

number sequence can have up to 30 digits.

☞

To insert one or more pauses anywhere in the dialing sequence, enter

CLR

for each

pause.

4. After dialing the telephone number, click

CLR

PGM

, then enter a two-digit number (01, 02, etc. up to

32) that you will use as the autodial number.

5. After storing the autodial number, hang up using the KP9X hang-up sequence.

Dialing an Autodial Number Stored in the TIF-951

1. Tap the

PHONE

key to activate dialing mode.

2. Tap "down" on the TIF talk key to latch it in the on position.

3. Tap

CLR

followed by the autodial number (01, 02, etc.).

4. When finished dialing, click the

PHONE

key again to exit dialing mode.

5. Hang up using theKP9X hang-up sequence.

1 2 ... 52 53 54 55 56 57 58

Comentarios a estos manuales

Sin comentarios

RTS XCP-ADAM-MC Manual de servicio Pagina 57

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS XCP-ADAM-MC