RTS XCP-ADAM-MC Manual de servicio descargar pdf (Pagina 15)

For latching operation (if enabled) tap a key; it will turn on and remain on. Tap the key again to turn it off

when finished.

☞

Latching may be turned off for the entire keypanel by setting DIP switch 1 on the KP-32 back panel to

the

Closed

position. Latching may be disabled for individual keys on a keypanel using ADAMedit:

Click the KP button on the ADAMedit toolbar to open the Keypanels / Ports setup screen. Select the

intercom port where the keypanel is connected. Place a check mark in the "D" check boxes for any

keys where you want to disable latching. Be sure to send your changes to the intercom system.

Operation of Intercom Keys with Auto Functions

☞

Assignment of keys with auto functions is described in the programming sections that follow.

Descriptions of the auto functions are also contained in the Glossary. Operation of keys with auto

functions is as follows:

Talk + auto follow:

Talk and listen can be activated separately. The listen assignment listens to whatever

is assigned to the talk key.

Talk + auto listen:

Both talk and listen will activate when talk is activated.

Talk + auto mute:

Listen will turn off when talk is activated.

Talk + auto reciprocal:

Listen will always be on, and talk may be turned on or off.

Talk + auto table:

If an IFB talk key has an auto-table listen assignment, talk and listen can be

independently activated. The listen key listens to whatever is defined as the IFB Listen Source for the IFB

that is assigned to the talk key.

☞

A full explanation of the auto-table feature is beyond the scope of this manual. For further information,

search for "IFB" in ADAMedit help, then read the topics "IFB Auto Table Description" and "IFB

Setup Procedures".

All Call Key:

Activating the key will also activate all keys to the left of it (up to, but not including another

all-call key).

Talk + DIM:

If a point-to-point key has the DIM function as a level 2 talk assignment, activating the key

will cause the crosspoint levels to diminish for any other intercom ports that are currently listening to the

same destination and that are in the same DIM table.

☞

A full explanation of DIM tables is beyond the scope of this manual. For further information, search

for "dim table" in ADAMedit help.

Operation of Intercom Keys with Options

Group Option Keys:

Activating the master key in a key group will activate all keys in that group

according to each key's individual key assignment. Activating a slave key will not affect any other keys in

the group.

☞

Key Groups setup: "Key Option Menu, Key Groups", page 35.

☞

Display Key Groups: "Display Menu, Key Groups", page 29.

Solo Key:

Activating a key that has the solo option will cause all other keys to turn off until the solo key is

again turned off.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 57 58

Comentarios a estos manuales

Sin comentarios

RTS XCP-ADAM-MC Manual de servicio Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS XCP-ADAM-MC