RTS RVON-I/O Manual de usuario descargar pdf (Pagina 37)

1 KEYPANEL MODE EXAMPLE

The GPI/O is associated with Port 0. This means that Port 0 will have eight GPI/O’s mapped to it. Connected to Port 0 is a

keypanel with the keypanel ID of 33 in AZedit. To use the GPI/O, you can create UPL statements. But be careful to assign the

correct Output Action parameters.

All Keypanel (Multiple Port) Mode:In All Keypanel mode, also referred to as multiple port mode, each keypanel is associated

to its corresponding GPI/O. For example, if keypanel 1 is connected to GPI/O 1, it is associate with the corresponding GPI/O

port. When using All Keypanel mode, an additional GPI/O is available. This means that each keypanel has 4

GPI/O and then a GPI/O associated with port 9.

Table 13. UPL Statement Example

TABLE 14. 1 Keypanel Mode GPI/O assignments

LOCAL

GPI/O

RVON-I/O GPI/O

HARDWARE PORT

GPI/O 9 DB-25 Port 1

GPI/O 10 DB-25 Port 2

GPI/O 11 DB-25 Port 3

GPI/O 12 DB-25 Port 4

GPI/O 13 DB-25 Port 5

GPI/O 14 DB-25 Port 6

GPI/O 15 DB-25 Port 7

GPI/O 16 DB-25 Port 8

• GPI/O 1 through 4 are assigned as

local GPI/O’s on keypanels (for

example, a KP-32 with an optional

GPI/O card.

• GPI/O 5 through 8 are reserved and

not used at this time.

• GPI/O 9 through 16 are assigned as

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

Sin comentarios

RTS RVON-I/O Manual de usuario Pagina 37