RTS XCP-ADAM-MC Manual de usuario descargar pdf (Pagina 31)

Serial Command Table

TABLE 3. Serial Command Table

Command Variable 1 Variable 2 Description

set rvon Help screen which lists all “set rvon” commands.

set rvon ip_addr X.X.X.X Set the IP Address for the RVON Card.

set rvon netmask X.X.X.X Set network mask for the RVON Card.

set rvon gateway X.X.X.X Set the gateway IP Address for the RVON-8 card.

set rvon user abcdefg

Set the RVON user name for telnet access.

Default “telex”

set rvon password abcdefg

Set the RVON password for telnet access (8-40 characters).

Default “password”

set rvon vad_threshold [adaptive ⎢#]

Set the VAD threshold (silence detection) Adaptive refers to

auto-select. The # can be -20 to +10dBm.

set channel

[chan]

Help screen which lists all “set tcid” commands (TCID 0-7).

set channel

[chan]

dest_ip X.X.X.X

Set the destination IP Address for this particular

RVON_Channel (same as tcid).

set channel

[chan]

dest_type X dest_type X = 0 (rvon-8 or rvon-C), 1 (rvon-1), 2 (rvon-I/O).

set channel

[chan]

chan_codec X

Set the profile to use which includes the compression codec

see below (0-27).

set channel

[chan]

onhook Force the channel to disconnect the port.

set channel

[chan]

offhook Force the channel to connect the port.

set emac auto*

Enables auto-negotiation of the Ethernet interface

configuration.

set emac 10 half Configures the Ethernet interface for 10Mbps half duplex.

set emac 10 full Configures the Ethernet interface for 10Mbps full duplex.

set emac 100

half

Configures the Ethernet interface for 100 Mbps half duplex.

set emac 100

full

Configures the Ethernet interface for 100 Mbps full duplex.

set serial ip_addr X.X.X.X

Set the destination IP Address for this serial pass-through

port.

set serial baud X Set the baud rate to use: 50 through 115000.

activate Must do an activate command to cause changes to take effect.

show rvon Display current settings

show serial Display current settings

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 58 59

Comentarios a estos manuales

Sin comentarios

RTS XCP-ADAM-MC Manual de usuario Pagina 31

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta RTS XCP-ADAM-MC