RTS XCP-48-RJ45 Manual de usuario Pagina 8

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 7
4
DIP Switches
NOTE: You must remove the card from the frame in order to change any DIP switch settings.
FIGURE 1. Default DIP switch settings on the AIO-16 card (SB01).
DIP Switch 1 Controls the initial load (or reload) of the firmware.
OFF (open) Normal operation
ON (closed) Boot into debug mode.
Description When the switch is in the on position, the AIO-16 card skips the firmware programmed in flash.
When the switch is in the off position, it runs the firmware from flash.
DIP Switches 2-7
Keep in the off position.
DIP Switch 8 Debug Only
CAUTION: DIP Switch 8 should always be left in the off position. It is reserved for debugging
and can have unintended consequences.
12345678
ON
SB01
Vista de pagina 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 71 72

Comentarios a estos manuales

Sin comentarios